Installing A New Garage Door In Baltimore

    Is your garage door not opening or stuck wide open? Looking for a professional repair technician?

    call our garage door repair team now.

    CALL ☎️ (410) 469-1032

    Or, fill out this form and we will contact you shortly

    Installing a new garage door in Baltimore should only be done by professionals.

    However, If you insist on it, you should begin by ensuring your safety.

    Hence, you should make sure that you are equipped with all the tools necessary to ensure proper installation.

    Here are some tips on installation, as well as guidance and directions to help you in installing a new garage door in Baltimore:

    Release the tension of the door.

    The first step that you need to do is to release the tension of the garage door.

    You will need extreme caution, as the springs of the garage door are under a huge amount of weight as well as tension.

    If you handle it improperly, it may cause injuries as well as damages.

    Hence, before you work on the installation, you should release the tension first from the torsion springs.

    Unplug the garage door opener.

    In installing a new garage door in Baltimore, it is necessary that you unplug the opener after you have secured the release of the tension from the springs.

    In order to safely unplug it, all you need to do is pull the red emergency cord.

    This action will move the arm of the trolley vertically so that you can raise or lower the door using your bare hands.

    After this has been done, you can now begin the removal of the sectional door panels.

    Install the panels.

    When you are done making sure that the above mentioned steps have been completed, you can now start the installation of the new garage door.

    If you are replacing a garage door with two cars, then you should place a reinforcing bar at the top panel so as to prevent any bowing that is in the center.

    Afterwards, you can drill the pilot holes if it has not been drilled by the manufacturer itself.

    Then, simply utilize the screws in order to have the bar secured to the panel.

    Secure the hinges and have the tracks installed.

    The next thing to do is to secure the top of each of the hinges on top of the top panel.

    Then, put the wheel axles on the hinges from both sides.

    After that, you can then install the top as well as the bottom axle supports.

    Next, have the track installed and make sure that the wheels all lie rightfully in the track so as to make sure that it has proper functionality.

    Lastly, simply attach the cable of the door to the hook that is found on the panel axle support that you can locate at the bottom.

    Then, put the bottom bracket against the wall.

    Affix the spring assembly to the track.

    For this step, you should assemble the pieces that will support the spring and affix it to the track.

    Afterward, use the ceiling from the support of the previous door.

    Then, rest the section of the track that is curved on the vertical piece that has been made earlier.

    Then, fasten the other rear to the bracket at the ceiling.

    Fasten the tracks together.

    This step will require you to align the horizontal and vertical tracks.

    You need to affix these tracks to the door and bolt them together.

    Install the springs.

    In installing a new garage door in Baltimore, the next step is to link the spring anchors to the springs and affix a locking cone on them.

    After that, you need to fasten them securely to the header bracket.

    Install the torsion rod and pulleys.

    In order to install the torsion rod, simply slide it onto the holes that can be found on the side of the header brackets.

    Then, just affix the pulleys to both ends of the rod.

    If you are done, attach the cable and then tighten the springs as well.

    Remember that you need to employ a garage door installation in Baltimore to ensure safety.

    Call Smooth Openers

    Installing a new garage door in Baltimore is not that easy.

    However, Smooth Openers is the perfect company that can perform such a heavy task.

    We are a team of professionals and experts who operate for the needs and satisfaction of our clients.

    We offer a wide range of services, ranging from garage door installation to garage door repair in Baltimore.

    Do not hesitate to contact us should you need any help!

    Call Smooth Openers for the health of your garage door!

    Rate this post
    COVID-19 NOTICE:
    Our technicians are equipped with masks and gloves complying with health and safety regulations.
    This is default text for notification bar