Garage Door Spring Repair: What You Need To Know

    Is your garage door not opening or stuck wide open? Looking for a professional repair technician?

    Get in touch with our garage door repair team and help is on it’s way! When it comes to garage door repair in Baltimore and its surroundings, Better leave it up to the professionals. For a FREE quote and estimate..

    CALL NOW: ☎️ +1(410) 469-1032

    Or, fill out this form and we will contact you shortly




    Show us the damage: Send us some photos for a FREE cost estimate.

    It is easy to overlook the household items that you do not see every day, such as the garage door spring.

    You never notice it is there until it gets broken.

    Once it does, you can be stuck in a garage with a door that won’t open, and other valuables, such as your vehicle that won’t be able to get out.

    Whenever you are stuck with this issue, there are options that you can take in order to solve it.

    You can reach out to a garage door repair in Baltimore or have a garage door spring repair done on your own.

    A professional may charge you between $200 to $300, but doing it on your own can cost you less than a hundred.

    However, it is not safe at all.

    A person who undertakes a project without prior knowledge or experience might end up biting off more than what he can chew.

    However, if you are persistent on it, there are some things that you need to understand with this garage door spring repair: what you need to know.

    If you want to attempt to tackle this harrowing project on your own, here are some of the tips on garage door spring repair: what you need to know.

    Educate yourself on the different types of springs.

    Before you try to replace the spring on your door, you should first check the type of spring that needs to be replaced.

    It is important to educate yourself regarding this, as it is part of the garage door spring repair: what you need to know.

    Springs for the garage door usually come in two categories:

    Extension Springs

    These are springs that are long and skinny.

    They run parallel to the horizontal tracks of the door and store their energy by means of stretching or extending whenever the door moves.

    They come in three types: open-looped springs, double-looped springs, or clipped-end springs.

    Open-looped springs are considered the weakest type of extension springs, as they rely on the open wire at the rear.

    Once this wire breaks, you have to replace the entire spring itself, never mind if it is the only component that is faulty.

    Double-looped springs, on the other hand, are far stronger than the first one, as it features two coils that are usually found at the rear of the spring that links to the pulley and the eyebolt.

    Lastly, the clipped-end springs are the strongest of the three.

    They can live longer and can be used frequently on garage doors that have a weight of more than 200lbs.

    Torsion Springs

    Your garage door can employ one to four torsion springs.

    It just depends on the size, the weight, and the strength of the door.

    This type of spring is broad, which can be located on a metal shaft that is on top of the opening of the door.

    There are aluminum drums that are put on each side of the metal shaft, where the springs are winded to a particular torsion setting, which is relative to the system.

    These torsion springs can either be standard, early-set, torque-master, or steel rolling-door springs.

    The standard torsion springs are most commonly found on garage doors in the residential area, as they are lighter doors that only require a single spring for an effective operation.

    Early-set springs, on the other hand, are quite similar to the standard ones.

    However, they are placed on the middle of the shaft of the torsion.

    Meanwhile, the steel rolling-door springs can normally be seen in some of the commercial and industrial buildings.

    They are springs that are contained inside the torsion barrel.

    For torque-master springs, they are usually enclosed inside the torsion shaft.

    They are held in position by the winding cones that usually sit at the end of the rods.

    The most common types of springs that are for residential replacements are the extension springs, but they can also use standard or early-set torsion springs.

    Just remember that it is entirely dangerous to replace the springs yourself.

    Hence, you should reach out to a garage door repair in Baltimore.

    Call Smooth Openers

    When it comes to the garage door spring repair: what you need to know, Smooth Openers is an expert.

    We are a team of professionals and experts who operate for the needs and satisfaction of our clients.

    We offer a wide range of services, ranging from garage door installation in Baltimore to garage door repair.

    Do not hesitate to contact us should you need any help!

    Call Smooth Openers for the health of your garage door!

    Rate this post

    Recommended articles

    Contact Us
    COVID-19 NOTICE:
    Our technicians are equipped with masks and gloves complying with health and safety regulations.
    This is default text for notification bar