There is perhaps no other part of the home that experiences more wear and tear than that of your garage door.
An average garage door has the ability to go up and down over a thousand times every year.
When it is maintained and kept in a good condition, it can provide convenience as well as security.
However, a door that has been neglected can produce locomotive noise that is disruptive.
Furthermore, it can pose a safety risk to the family, especially to children.
Fortunately, there are various steps that can be taken, which include annual inspection as well as maintenance of the automatic garage door.
If you want to ensure a reliable, quiet, and safe operation, it is best that you follow these steps.
If not, then you should be able to reach out to a garage door repair in Baltimore.
There are simple maintenance steps for your garage door that do not need any special skills and can take only less than 10 minutes for you to perform.
The materials that are needed are also made available in various home centers as well as garage door dealers.
Furthermore, if you want to get to know more about garage door tune-up in Baltimore, you should know that a huge amount of garage doors usually employ the use of torsion springs, which are placed above the door.
They can also make use of extension springs, which are placed above the roller track in the upper area.
How to tune up your garage door?
A garage door tune-up in Baltimore can be achieved, but you have to make sure that you have the skills for it.
If not, then you need the assistance of a garage door repair in Baltimore. First, you need to exercise caution while working on the door.
To do this, you need to disconnect the automatic door opener so that it cannot be turned on.
If the door has been opened, simply place some locking pliers onto the roller track that is found below the rollers to prevent it from dropping on you.
You should also not remove the lift cable while the springs are still under tension.
If they are released, they can easily hack into you.
Furthermore, you should also not try to adjust or release the tension on the overhead torsion spring.
This can be done by garage door installation in Baltimore only.
Fasten the nuts and the bolts
After safety has been ensured, a garage door tune-up in Baltimore can then be easily achieved.
The first thing to do is to fasten the nuts and the bolts.
As the door moves, the hardware can also easily become loose.
Hence, you have to inspect as well as tighten the roller brackets as well as the bolts that are holding the rails in order to support the brackets.
Perform maintenance on the springs, chains, and seals
The next thing to do is to have the chain or the screw lubricated on the opener.
You should be able to do this annually by making use of white lithium grease.
There are also spray-on versions that are likewise found at home centers.
Lubrication will make the operation of the opener more smooth, quiet, and can extend the life of the chain as well as the opener.
Replace the U-Shaped Astragal
If you have a steel door, then you should know that there is a hollow rubber weather seal that is found at the bottom of the steel doors.
It is called the U-shaped astragal and can be susceptible to damage from wear and destruction caused by mice.
These astragals are given sizes according to the width when they lie flat.
You can choose the width that fits your situation carefully.
Also, make use of a bigger seal if you have to fill in a wider gap that is between the door as well as the floor.
Call Smooth Openers
A garage door tune-up in Baltimore can be performed by our trusted technicians and professionals in Smooth Openers.
We are a team of professionals who offer only the best services, from repair to garage door installation in Baltimore.
Do not hesitate to call us whenever you need us.
Contact Smooth Openers today!