Table of Contents
Having a garage door will help keep your family, your employees, and your valuables safe from harm, especially theft, extreme weather, and high or low temperatures.
To make sure that your investment is well protected, it should be noted that you have to keep the condition of the panels monitored.
You also have to pay attention to the possible wear and tear closely.
It doesn’t matter whether you get your car accidentally backed up into the garage door, or a bad storm has hit it enough to result in dents.
No matter the cause, you need to reach out to a garage door repair in Baltimore to get rid of the dents.
If you have dents on your garage door, here are some of the tips that you can do before calling a garage door dent repair:
Identify the extent of damage.
Garage door dent repair has various methods than could be undertaken.
The first step is to identify if the panel is interfering with the opening and the closing of the door.
The door has an assembly that can handle the high levels of tension.
Hence, you need to remove your valuables, vehicles, and other personal belongings from the area before attempting to operate the opener.
If the garage door is not able to open or close correctly, then you should call a garage door repair in Baltimore immediately.
However, not every garage door material can be repaired in a similar way.
There are panels that consist of aluminum or steel that are usually easier to repair than wooden surfaces.
A professional that is certified can help you in deciding what is the best route for you to take in terms of a garage door dent repair according to the specifications of your manufacturer.
Garage door dent repair methods
When the garage door is still able to operate, then a garage door repair in Baltimore can easily fix it.
Here are some of the methods that your technician can use for garage door dent repair:
Hammer the dent out using a mallet.
If you have an aluminum garage door, then you must know that it is popular for its malleability.
Using the assistance of a professional, the small dents can be erased easily by means of hammering the dented sections back into place.
Moreover, a professional can also wash the dented surface using soap and water.
Then, bring a wood block and a mallet.
After that, move to the other side of the dent and then put the wood block just over it.
Then, hammer down the dented section using the mallet until the surface is now even.
There are deep dents that may need the use of a sandpaper that is of fine grit, as well as an auto body filler to achieve good results.
Your local garage door repair in Baltimore will be able to provide you with options for any paint coats for the exterior after the surface has been dried.
Use suction cups.
You can have a garage door dent repair by using suction cups.
The same with some automotive repairs, there are some technicians who make use of suction devices in order to correct the dents.
If you have a metal door, then it will easily respond to such a technique, given that the dings, as well as bumps, are easily pulled outwards and then set in the right direction.
This suction cup method is good for jobs that are small in scale and can take only a few minutes to be completed.
Use heat.
Metal garage doors usually have panels that shift back into place when there is rapid heat and cooling.
You can achieve a garage door dent repair in no time using aluminum foil, a can of compressed air, and a heat source so as to reshape the dented panel.
Call Smooth Openers
A garage door dent repair can easily be achieved with the right technician.
Smooth Openers is the perfect company that can attest to that.
We are a team of professionals and experts who operate for the needs and satisfaction of our clients.
We offer a wide range of services, ranging from garage door installation in Baltimore to garage door repair.
Do not hesitate to contact us should you need any help!
Call Smooth Openers for the health of your garage door!
